Privacy Fence Installation: DIY or Hire A Pro?

fence intsallation.jpg

There are many great ways to make your home sweeter by showing a little love and care. Landscaping designs and hardscaping patterns can make your backyard or patio look amazing and invite a lot of compliments from the guests visiting your house. Moreover, a privacy fence is a great way to ensure safety and freedom from intrusion. Experts belonging to the field of fence installation in Oklahoma City often recommend hiring professionals to install a privacy fence in your backyard easily and without stress. However, this blog post brings you some steps to help you install a fence by yourself.

1. Determine spacing for the fence posts.

The first and foremost step to take when you choose to install a fence for your yard by yourself is to carefully estimate the spacing between the fence posts. As a rule of thumb, the fence posts should be about six to eight feet apart and the corners should be put in first. To ensure perfect alignment of the posts, you can stretch a string from each corner to act as a guide. It will be helpful if you can mark the exact position by digging holes where you would like each post to be positioned.


2. Prepare the ground for the fence.

The next step involves preparing holes and posts carefully. For this, you need to ensure that one-third of each post is buried in the ground. This contributes to enhancing the durability and longevity of your privacy fence. Further, a fence installed with utmost care and expertise also calls for coating the wooden surfaces with good preservatives so that chances of rotting and breaking can be avoided.



3. Install the fence posts

Installing a fence all by yourself can be a hard nut to crack, as it requires special tools and experience to get everything done in the right way. For example, when you install the fence after all the estimation and groundwork has finally be done, you also need to be very careful throughout the process of putting up the fence. One tip for this is to shovel two or three scoops of gravel around the bottom of the posts and use a level to ensure proper plumb for the fence. After this you can fill the holes with dirt, but do not disturb the post alignment during the process of tamping.

4. Attach the rails to the fence posts

Now you need to get the rails attached to the posts. The most important part of this process is the basic wood joint, where the ends of the rails are aligned and placed together. Here you must be careful about the alignment of the top and bottom rails.

5. Set the fence boards

It is completely up to you to use the above-mentioned DIY techniques for setting up the fence boards, but hiring professionals to get the task done is more prudent. At times, people want a vertical fence to decorate their patio. This involves a much more complicated process of nailing the boards in place and ensuring they stay strong and attractive over the time. Careful measurements and diligent efforts are essential for fence installation in Oklahoma City.

From the above, it is clear that a privacy fence is undoubtedly a great way to keep intruders away, but the idea to set up a fence by using DIY techniques is tiring and time-consuming. Thus, hiring professionals to do fence installation in Oklahoma City is very helpful and rewarding. There are a lot of service providers with efficient and experienced people on their team who can make things much easier and quicker for you. More importantly, these experts have all the tools and equipment needed to get the fence installed in no time and without any hassles so that you can sit back and relax while the professionals get everything done just the way you want.